What is a ViraClinAir®?

The first computer-controlled room air purifier of its kind

FOR WHOME IS ViraClinAir®?

Especially for those branches that have suffered from Corona most.

Why to use ViraClinAir®?

Because it closes functional gaps and provides security

In contrast to previous new "Corona" air purifiers:

• ViraClinAir® generates a significantly stronger air exchange with a low sound level
• With special air nozzles on the ceiling, ViraClinAir® ensures that the cleaned air is evenly distributed in the room
• Prevents ViraClinAir® side air currents that can transmit viruses from one person to another.
• ViraClinAir® fulfills a 6 to 20-fold air change rate per hour
• Is ViraClinAir® also suitable for larger rooms up to 200 square meters with a changing and sometimes larger number of people, such as in classrooms or restaurants
• ViraClinAir® monitors the air quality by sensor with alarm functions
• ViraClinAir® constantly controls its filter and disinfection functions by sensor
• ViraClinAir® disinfects itself before changing the filter.
• The ViraClinAir® can be provided with a connection for fresh air supply.

THE WORKING PRINCIPLE of the ViraClinAir®

Purified air, blows contaminated breath away from the airways towards the floor, where it is sucked in and cleaned by the ViraClinAir®.

• The air has to flow out near the ceiling and the entire room from above
  Flow downwards, ViraClinAir® has a variable height of up to 3.50 m and can therefore be adapted to most rooms.
• ViraClinAir® can be used in rooms up to 200 square meters
• ViraClinAir® generates 6 to 30 air changes per hour, depending on the size of the room
• With the use of ViraClinAir® there is no unpleasant draft because the device works with a maximum flow rate of 0.15m / h.
• Specially shaped and individually adjusted nozzles for the desired air distribution.
• ViraClinAir® monitors and documents the room climate + all of its functions.
• The room climate is shown on a touch display and the device is operated.
• ViraClinAir® is made up of standard ventilation technology elements and can therefore be ideally adapted to any space.
• ViraClinAir® is child's play to install, can be easily dismantled for transport and can be easily moved even when set up thanks to lockable wheels.
• ViraClinAir® is intended as an efficient solution to the corona problem and is designed for meeting rooms that do not have a built-in ventilation system with fresh air supply. The existingair is sterilized quickly and safely.
• A necessary fresh air supply with oxygen is indicated by the system with a traffic light.
  
  

AIR FILTERING and DISINFECTION

In 4 steps to clean, sterile air

1st Stage: Fine filter ISO ePM2,5 Filter(F7)

In this preliminary stage, the air is first through a fine filter class F7 pre-cleaned and, for example, freed from the following particles :

• Insects
• Textile fiber and hair
• Sand
• Fly ash
• pollen
• Spores, pollen, lint

2nd Stage: HEPA particulate filter Kl. H13/14

The pre-filtered air is now in a HEPA filter class H13 / 14 freed from almost all remaining germs as follows.

• Aerosols
• Germs, bacteria, viruses
• tobacco smoke
• Corona viruses

3rd Stage: UV-C radiation

This is followed by the final disinfection of any remaining four using UV-C radiation

4th Stage: Self-disinfection of the filters

It is used to self-disinfect the filters and the system

It is recommended from time to time to carry out a disinfection of the system once a month using the built-in disinfection generator with  activated  oxygen  or  hydrogen  peroxide.  The  disinfection generator is activated for this purpose. When the function is switched on, the entire system and especially the filters are freed from any virus load. The disinfection generator may only be operated in the room without people.
The system controls this independently.
After activation, the room is queried by a proximity sensor before cleaning starts. The disinfection generator only starts when everyone has left the room.  It  then  runs for 1 hour. If someone should enter the room during this time, the disinfection Generator is switched off immediately.It makes sense to switch on the disinfection generator    only    after    the operating hours have ended overnight, as the room cannot be re-entered until 30 minutes after the end of cleaning. This makes changing the filter, albeit simple, rarely necessary. The system reports self-monitoring when a filter change is necessary.

SENSOR MONITOR AND CONTROL DISPLAY

Makes what the eye cannot see, visible and comprehensible.

GREEN air is OK

YELLOW Air still OK but soon ventilate

RED: penetrate ventilation

Moniored Parameters:

CO2 concentration oft he air
A CO2 sensor displays the air condition and gives an alarm for ventilation when the CO2 values become critical. (See traffic light display in the display) The CO2 sensor diagram shows the courseof the CO2 increase so that ventilation can be carried out at an early stage.Through a ventilationoutlet, an automatic fresh air ventilation can be connected.

Aerosol content of the air
Aerosol content, shows the exposure to breathing air and regulates the amount of air released in automatic mode. The aerosol diagram shows the course of the aerosol content of the air after switching on the ventilation.

Room temperature
Sensor, measures the room temperature. The temperature diagram shows the process with heating with a closed window and cooling with an open window.

Humidity
The humidity diagram shows the increase in humidity, mostly caused by the air breathed by the people present.

Fan strength / air exchange rate
The air change rate shows the change rate per hour. Depending on the number of people in the room, this is increased or decreased in order to save energy. The air exchange rate can be set manually or automatically regulated by the system via the aerosol sensor. The self- monitoring of the system always ensures a sufficient air exchange rate, according to the size of the room and the number of people in the room.

Air passage filter
The measurement of the filter pressure is used to monitor the filter function. As soon as these are full and need to be changed, the system sounds an alarm. A filter change is easily possible even for a layperson.

UV-C light intensity
The UV-C tubes used have a service life of approx. 9000 hours. If the light intensity falls below a limit value, the system triggers an alarm. And the UV tubes have to be changed

Documentation
All measured values are documented by the system with date and time and can be read out at any time

Password
A password takes you to the service settings

WLAN
The system has WLAN access, documented measured values can be queried via WLAN.

SELF-CONTROL

Safety through failure warning and maintenance information

• The UV-C light intensity, to control the UV light tubes.
• The pressure difference of the filter to determine if filter replacement is necessary
• The function of the fan motor
• Whether there are people in the room, as cleaning with active oxygen is only carried out in the absence of people.

OPERATING MODES

4 modes of operation can be used as required.

Manual control:

The system regulates itself, but the air exchange rate can be adjusted manually.

Automatic:

Stand-by mode:

Self-cleaning:

AIR DISTRIBUTTION

How does ViraClinAir® achieve its patented air flow?

• The Coanda Effect. This leaves the air relatively free of turbulence on the ceiling and floor. Using this effect ensures that the air on the ceiling runs to the next wall and flows down there. On the floor, the air flows back to the intake opening of the ventilation. The external air circuit fills the entire room.
  
  
• The air movement in the room is similar to a toroid, the ceilings, the walls and the floor are used as an interference-free path by the Coanda effects. Lateral air currents emanate from this flow and turbulence forms, which ventilate the entire room.
  
  
• Laminar currents arise at the nozzles of the ViraClinAir®. After a certain distance they change into a turbulent flow, so that the middle room can also be supplied with a good exchange of air.
  
  
• There are also cross nozzles that blow off the inner space

AIR JET ADJUSTMENT

The following modifications are available:

MODELS AND PARTS

the different ViraClinAir® models in an overview:

DATA

Of the different ViraClinAir® model types

ADDITIONAL FUNCTIONS & FEATURES

for the ViraClinAir® VAC3 and VAC4

Additional functions of ViraClinAir® VAC - UNI

Overview

• Function monitoring of the HEPA and prefilter and the output of the UV-C radiation by sensors.
• In automatic mode, the motion sensor detects whether there are people in the room, the aerosol sensor also detects whether the air is polluted. The ventilation adapts to the existing air pollution and works in an energy-saving manner.
• When the flooding with active oxygen is switched on, the filters are freed from any viral load. The flooding with active oxygen only works when there are no people in the room.
• To be on the safe side, the active oxygen generator switches off immediately when a person approaches.
• THE CO2 sensor shows the air condition and gives an alarm to ventilate if the CO2 values become uncomfortable.

Additional functions ofViraClinAir®VAC-H

Overview

Additional functions of attachment W of ViraClinAir® VAC-W

Overview

Additional functions of attachment AW des Modell Typ ViraClinAir® VAC-AW

Overview

ESSENTIAL ADVANTAGES

ViraClinAir® overview:

• Inexpensive
• High performance up to 3000 m³/h
• Safe with additional UV-C light cleaning and internal disinfecting of filters
• The device permanently checks itselfe for safe function
• The device reaches up to the ceiling so that a complete room ventilation from top to bottom is made
• Use if various air effects: Laminar flow at the air nozzles to get far into the room. Distribution of air through the Coanda effect on the ceiling and centrifugal forces of the air through the circulation of air flow, so that ventilation takes place quickly and effective.